1、 Purpose and characteristics
The XH-Vx series micro tensile tester developed and produced by Beijing Tiandi Xinghuo Technology Development Co., Ltd. is suitable for testing the anchoring force of anchor rods, steel bars (planting bars), anchor bolts, and other anchor components. It is a commonly used instrument for quality inspection of anchor rod and anchor bolt construction projects.
The XH series micro puller consists of manual pumps, hydraulic cylinders, digital pressure gauges, and high-pressure hoses. The pump body is made of aluminum alloy material and stainless steel material, with a long service life. The hydraulic cylinder is a hollow self resetting type, which is quickly connected to the high-pressure rubber hose through a quick connector. The digital pressure gauge reading is intuitive and can directly read the tension (KN) values of anchor rods and anchor bolts. This series of pullers has a compact structure, accurate measurement values, and stable performance.
Compliant with standards:
GB 50367-2013 "Code for Design of Reinforcement of Concrete Structures"
GB 50330-2013 "Technical Code for Building Slope Engineering"
JGJ 120-2012 Technical Specification for Building Foundation Pit Support
CECS 22:2005 Technical Specification for Rock and Soil Anchor Rods (Cables)
GB 50007-2011 "Code for Design of Building Foundation"
JGJ 145-2013 "Technical Specification for Post Anchorage of Concrete Structures"
GB 50550-2010 "Code for Acceptance of Construction Quality of Building Structure Reinforcement Engineering"
GB 50203-2011 "Code for Acceptance of Construction Quality of Masonry Structures"
二、技术参数:
产品型号 | XH-V1 | XH-V2 | XH-V3 | XH-V4 | XH-V5 |
测量范围 | 0-10KN | 0-20KN | 0-30KN | 0-40KN | 0-50KN |
中心孔径 | 18mm | ||||
油缸行程 | 50mm | ||||
分 辨 率 | 0.001KN | ||||
示值误差 | 1% | ||||
供电方式 | 锂电池 | ||||
油缸重量 | 1.8KG | ||||
常用锚具 | 6mm-12mm | ||||
拉 杆 | M12 | ||||
转换接头 | M6-M12 |
3 Working principle
The working principle of a micro tensile tester (tension gauge) is to select a suitable anchor to clamp the leaked part of the tested rod after the central hole of the jack passes through the tested rod; Under the action of manual pump fluid pressure, oil pressure is transmitted to the cylinder body through the oil pipe, and the piston rod moves outward against the specialized anchor; The pressure directly acts on the outer shell of the anchor and is then transmitted to the clamp. After being subjected to force, the clamp clamps the tested rod tightly, ultimately causing the rod to experience outward pulling force; At this point, the pressure gauge on the pressure pump displays the corresponding force (kN) value, which reflects the magnitude of the pulling force on the tested rod. After completing the inspection, the puller needs to manually shake and vibrate the anchor with minimal force to easily remove the hollow oil cylinder.
4 Preparation for testing
1. According to the requirements of users (owners, quality supervisors, contractors, etc.) and in combination with the engineering situation, select sampling testing points, determine qualified tensile values, and use group testing plans to prepare for the correct implementation of corresponding testing tasks;
2. Before testing, the puller must be systematically calibrated and inspected to ensure the authenticity and reliability of on-site testing data;
Before conducting spot checks, technical disclosure should be made to specific operators to unify the testing methods, in order to accurately complete the corresponding actual operations;
After being confirmed by the entrusting party, specific anchor force pull-out testing can be carried out;
5. 1-2 operators are sufficient.
主要技术参数
型号/主要参数 | XH-V1.5 | XH-V2 | XH-V3 | XH-V4 | XH-V5 | |
高压手动泵 | 最大工作压力/MPa | 50 | ||||
柱塞直径/mm | 10 | |||||
质量/kg | 2 | |||||
液压缸 | 最大拔出力/kN | 15 | 20 | 30 | 40 | 50 |
中心孔径/mm | 18 | |||||
活塞行程/mm | 50 | |||||
质量/kg | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 | |
数显压力表 | 测量范围/kN | 0~15 | 0~20 | 0~30 | 0~40 | 0~50 |
电源/V | 4.2V充电电池 | |||||
质量/kg | 0.2 | |||||
分辨率 | 0.001KN | |||||
示值误差 | ≤±1%F.S |
配件与保修
实验仪器设备装箱单 | |||||
序号 | 名称 | 数量 | 序号 | 名称 | 数量 |
1 | 中空液压缸 | 1个 | 2 | 手动泵 | 1台 |
3 | 数显压力表 | 1块 | 4 | 高压胶管 | 1根 |
5 | 锚具(6-12mm) | 1套 | 6 | 拉杆及接头(M6-M12) | 1套 |
7 | 便携式仪器箱 | 1个 | 8 | 使用说明书 | 1份 |
9 | 保修卡 | 1份 | 10 | 合格证 | 1份 |