1、 Overview

The XH-6000N intelligent bond strength tester is suitable for detecting the bond strength of exterior wall decorative bricks, exterior wall insulation materials, mosaics, various boards, and paint materials. The standard block size is 95mm × 45mm and 40mm × There are two types of 40mm, and 40mm is generally selected for testing the bonding strength of external wall insulation × 40mm and 100mm × Two types of 100mm. The detector is designed with a maximum tensile force of 6.000kN to ensure the detection accuracy when detecting various adhesive forces, due to the low bonding strength and small bonding force of facing bricks during development. The manual oil pump is connected to a through center jack as a whole, with a compact structure and durability. It can be manually and continuously loaded evenly. A digital pressure gauge is used to display the bonding force value (Kn) or bonding strength (MPa). The instrument can automatically and accurately record the peak bonding force and maintain it. The total weight of the machine is about 2 kilograms. Each instrument is tested and qualified by a pressure load sensor before leaving the factory. The instrument has a free warranty of three years.

The XH-6000N intelligent adhesive (tensile) strength tester is an ideal replacement product for detectors with large volume, complex structure, and inconvenient operation. It has been widely used in many engineering quality supervision and inspection centers (stations), scientific research institutions, construction units, and supervision units across the country, and is deeply welcomed by engineering testing technicians and researchers from scientific research institutions.

Product features:

Built in micro hydraulic system, compact and exquisite, lightweight and easy to carry;

The main structure of XH-6000N is manufactured by combining aluminum alloy and stainless steel material;

XH-6000N standard embedded Han display pressure gauge;

Chinese operation menu with functions such as reset, peak, and storage;

During calibration, there are 10 segments of broken line correction to improve the accuracy of instrument calibration;

Low power design, automatic shutdown without operation, sustainable operation for over 200 hours;

Two measurement modes: strength value (MPa) and force value (Kn);

Switch the size of the pulling block and automatically calculate the strength value based on the force value and area.

Compliant with standards:

JGJ 110-2017 "Standard for Testing the Bond Strength of Facing Bricks in Building Engineering"

JGJ 126-2015 "Code for Construction and Acceptance of Exterior Wall Facing Brick Engineering"

JGJ 144-2019 "Technical Specification for External Wall Insulation Engineering"

JG/T 158-2013 "Rubber powder polystyrene particle external wall insulation system"

JG 149-2003 "Expanded polystyrene particle board thin plastered external wall insulation system"

GB 50550-2010 "Code for Acceptance of Construction Quality of Building Structure Reinforcement Engineering"

2、 Main technical parameters

Instrument structure: integrated design

Maximum extraction force of the detector: 6KN/0-3.75MPa 10KN/0-6.25MPa

Display mode: Adjustable force value (Kn) and strength value (MPa)

Digital display resolution: 0.001KN/0.001MPa

Piston stroke: 10 mm

Indication error: ≤ ± 1%

Display method: High brightness LCD screen with backlight

Peak Hold: Yes

Correction method: full scale or 10 segment line correction (to improve accuracy)

Main material: combination of aluminum alloy and stainless steel

Mass (host): 1.8Kg