1、 Overview
ZTT-101A Multi angle Retroreflection Sign Measuring Instrument is a specialized instrument used to measure the retroreflection coefficient (R ′) of traffic sign materials. Applicable to quality control and testing of retroreflective marking materials by material production units, quality supervision departments, engineering construction and supervision units, etc. The design of this instrument complies with the international standard ISO 3864 (1984) and the Technical Specification No. 54 of the International Commission on Illumination (CIE), and refers to relevant national standards such as ASTM E808-01 "Retroreflection Description Standard", ASTM E809-00 "Measurement of Retroreflector Optical Performance", and ASTM E810-00 "Test Method for Retroreflective Film Retroreflection Coefficient" in the United States; German DIN 67520-1994 et al. The performance of the instrument meets the requirements of China's transportation industry standard JT/T612-2004 "Retroreflective Measuring Instrument" and meets the measurement requirements specified in the national standard GB/T18833-2012 "Reflective Film for Highway Traffic Signs".
2、 Main technical indicators
1. Observation angle( α): Continuously adjustable within the range of 0 º to 2.0 º, with a reading accuracy of 0.002 º;
2. Incident angle( β):- Continuously adjustable within the range of 45 º to+45 º, with a reading graduation of 1 º;
3. Color temperature of light source: 2856K (i.e. standard A light source);
4. Detector: Silicon diode, corrected by a filter to comply with CIE standard photometric observer spectral luminous efficiency V( λ) Requirements for;
5. The opening angle of the detector aperture to the sample: 12 ';
6. Measurement range of retroreflection coefficient: 0-3000cd · lx-1;
7. Resolution: 0.1 cd · lx-1;
8. Power supply: Lithium battery power supply, continuous working time of 48 hours.
9. Can calibrate 12 pairs of angles at once
10. Data storage: 10000 test messages
11. Screen: 4.5 "854x480 (touch screen)
12. Storage method: TF storage card
13. Charging method: 220V AC 50HZ; DC8.4V
14. Power supply: Lithium battery (6600mAh)
15. Operating temperature: -10 ° C~+40 ° C
16. Storage temperature: -30 ° C~+75 ° C
17. Operating humidity: 10~90%, no condensation
1 | 光学检测头 | 壹台 |
2 | 入射角(β)调节器 | 壹台 |
3 | 测量显示仪 | 壹台 |
4 | 校准板(黑,白各一块) | 壹套 |
5 | 充电器 | 壹个 |
6 | 使用说明书 | 壹份 |
7 | 产品生产合格证,保修卡 | 各壹份 |
主要技术指标
序号 | 技术名称 | 参数 | 序号 | 技术名称 | 参数 |
1 | 观测角(α) | 0.2º~2.0º范围内连续可调,读数精度为0.002º | 2 | 入射角(β) | -45º~+45º范围内连续可调,读数分度为1º |
3 | 光源色温 | 2856K(即标准A光源) | 4 | 探测器 | 硅二极管,经滤光器修正后符合CIE标准光度观察者光谱光视效率V(λ)的要求 |
5 | 探测器孔径对试样的张角 | 12′ | 6 | 逆反射系数测量范围 | 0~9999cd·lx-1·m-2 |
7 | 分辨率 | 0.1cd·lx-1·m-2 | 8 | 供电 | 锂电池供电,连续工作时间30h以上,可内室外测量 |
9 | 一次校准(最多) | 9对角度 | 10 | 数据储存 | 10000条测试信息 |
11 | 屏幕 : | 4.5" 854x480 (触摸屏) | 12 | 电脑连接方式: | TF存储卡 |
13 | 充电方式: | 220V AC 50HZ; DC8.4V | 14 | 电源供应 | 锂电(6600mah) |
15 | 使用温度 | -15°C ~ +50°C | 16 | 储藏温度 | -30°C ~ +75°C |
17 | 操作湿度 | 10 ~ 90%,无结露 |
装箱清单
产品清单 | |||||
序号 | 品名 | 数量 | 序号 | 品名 | 数量 |
1 | 光学检测头 | 壹台 | 2 | 入射角(β)调节器 | 壹套 |
3 | 测量显示仪 | 壹台 | 4 | 校准板(黑,白各一块) | 壹套 |
5 | 充电器 | 壹个 | 6 | 光源电缆 | 壹条 |
7 | 探测器电缆 | 壹条 | 8 | 使用说明书 | 壹份 |
9 | 产品生产合格证,保修卡 | 各壹份 | 10 | 校准证书(应不同用户要求配置) | 壹份 |