1、 Overview
The ZTT-201C raised road sign measuring instrument is an instrument that measures the main performance index of raised road signs - luminous intensity coefficient. This instrument is suitable for photometry laboratories, testing centers, traffic management departments, and road construction sites; It is also applicable to the inspection of product quality by protruding road sign manufacturers. The measuring object of this instrument is a rectangular raised landmark. The main technical basis for the design of this instrument is China's national standard GB8416-2003 "Visual Signal Surface Color", GB/T3978-2008 "Standard Lighting Body and Geometric Conditions", GB/T3979-2008 "Measurement Methods for Object Color", GB/T24725-2009 "Raised Road Signs", GB/T 26377-2010 "Retroreflection Measuring Instruments", and JJF 1809-2020 "Calibration Specification for Retroreflection Measuring Instruments". We also referred to relevant national standards (such as ASTM-810, ASTM-E 809, DIN 67520). The detector of this instrument meets the requirements of the CIE (International Commission on Illumination) standard photometric observer, the color temperature of the light source meets the CIE standard A light source, and the geometric conditions of the instrument comply with the provisions of CIE Technical Document No. 54. Therefore, the technical conditions of this instrument are consistent with international standards.
2、 Main technical indicators
1. Observation angle( α): 0.2 °~2.0 ° continuously adjustable;
2. Angle of incidence (including β 1 and β 2) : β 1 is ± 0 ° β 2 are ± 0 °, ± 5 °, ± 10 °, ± 15 °, ± 20 ° respectively;
3. Light source color temperature: 2856K (in accordance with CIE standard A light source);
4. Detector: Silicon diode+V( λ) Correction (compliance with CIE standard photometric observers);
5. Measurement range: 0-3000 mcd • lx-1
6. Power supply: Lithium battery pack 7.4V (capacity 6000ma)
Battery continuous working time: ≈ 72 hours
Data storage: 10000 test messages
Screen: 4.5 "854x480 (touch screen)
Computer connection method: TF memory card
Charging method: 220VAC 50HZ; DC8.4V
Power supply: lithium battery (6600mAh)
Operating temperature: -15 ° C~+50 ° C
Storage temperature: -30 ° C~+85 ° C
Operating humidity: 10~90%, no condensation
L Voice reading: standard configuration
Packaging box: high-end instrument box
Data calibration: Calibrate 9 pairs of angles at once (no need to recalibrate when starting)
三、装箱清单
序号 | 产品名称 | 单位 | 数量 |
1 | 逆反射突起路标测量仪主机 | 台 | 壹 |
2 | 室内测量角度可调底板 | 块 | 壹 |
3 | 白色校准块 | 块 | 壹 |
4 | 黄色校准块 | 块 | 壹 |
5 | 野外测量0°定位板 | 块 | 壹 |
6 | 野外测量5°定位板 | 块 | 壹 |
7 | 充电器 | 只 | 壹 |
8 | 产品说明书 | 份 | 壹 |
9 | 保修单 | 份 | 壹 |
10 | 产品合格证 | 份 | 壹 |
11 | 存储卡 | 个 | 壹 |
12 | 读卡器 | 个 | 壹 |
主要技术指标
序号 | 技术名称 | 参数 | 序号 | 技术名称 | 参数 |
1 | 观测角(α) | 0.2°~2.0°连续可调 | 2 | 入射角(包括β1和β2) | β1为±0°、β2分别为±0°、±5°、±10°、±15°、±20° |
3 | 光源色温 | 2856K(符合CIE标准A光源) | 4 | 探测器 | 硅二极管+V(λ)修正(符合CIE标准光度观察者) |
5 | 测量范围 | 0~3000mcd·lx-1 | 6 | 电源 | 锂电池组7.4V(容量为6000ma) |
7 | 电池连续工作时间 | ≈72 小时 | 8 | 屏幕 | 4.5" 854x480 (触摸屏) |
9 | 电脑连接方式 | TF存储卡 | 10 | 充电方式 | 220VAC 50HZ; DC8.4V |
11 | 电源供应 | 锂电(6600mah) | 12 | 使用温度 | -15°C ~ +50°C |
13 | 储藏温度: | -30°C ~ +85°C | 14 | 操作湿度 | 10 ~ 90%,无结露 |
15 | 语音报读 | 标配 | 16 | 数据标定 | 一次标定9对角度(开机无需重新标定) |