-
Product Center
-
home
-
News Center
-
technology
-
download
-
Contact Us
application area | Suitable for testing the anchoring force of anchor rods, anchor cables, anchor bolts, and other anchor solids. |
Compliant with standards | CECS 22:2005 Technical Specification for Rock and Soil Anchor Rods (Cables) GB50367-2006 "Code for Design of Reinforcement of Concrete Structures" GB50550-2010 "Code for Acceptance of Construction Quality of Building Structure Reinforcement Engineering" GB50007-2011 "Code for Design of Building Foundation" JGJ120-2012 Technical Specification for Building Foundation Pit Support JGJ 145-2013 "Technical Specification for Post Anchorage of Concrete Structures" GB50330-2013 "Technical Code for Building Slope Engineering" |
Functional characteristics | Electric pump dual oil circuit plunger type: can be adjusted according to the required pressure setting; Pressure can be graded for loading and unloading Three position four way manual directional valve: the inlet and outlet oil circuits can be reversed; Significant sealing performance Hollow double oil circuit of hydraulic cylinder: connected to high-pressure rubber hose through quick connector Digital pressure gauge: directly reading KN value without conversion |
Working principle |
After the central hole of the jack is covered by the tested rod, select a suitable fixture to clamp the exposed part of the tested rod that is exposed to the central hole; At the hydraulic pressure of the pressure pump Under the action, oil pressure is transmitted to the jack cylinder body through the oil pipe, and the piston rod moves outward against the specialized clamp; Pressure acts directly on the anchor shell Then, it is transmitted to the clamp, which is subjected to force and then clamps the tested rod, ultimately causing the rod to experience outward pulling force; At this point, the pressure gauge on the pressure pump Display the corresponding force (kN) value, which reflects the magnitude of the pulling force on the tested rod. If the above rods are steel bars, the magnitude of the anchoring force on the steel bars can be measured. After completing the inspection, the tension meter needs to be manually shaken with a small force The method of vibration is used to remove the anchor, in order to conveniently remove and pull out the jack. |
主要技术参数
| 型号/主要参数 | XH-50T | XH-60T | XH-80T | XH-100T | ||
| 手 动 泵 | 工作压力/MPa | 高压 | 63 | |||
| 低压 | 2(可调) | |||||
| 流量/ml/次 | 高压 | 2.3 | ||||
| 低压 | 14.5 | |||||
| 最大手压力/N | 500 | |||||
| 贮油量/L | 3 | |||||
| 质量/kg | 12 | |||||
| 液压缸 | 工作能力/kN | 500 | 600 | 800 | 1000 | |
| 拉力行程/mm | 120 | 120 | 120 | 150 | ||
| 中心孔径/mm | 60 | 65 | 75 | 85 | ||
| 质量/kg | 26 | 33 | 42 | 56 | ||
| 数字压力表 | 测量范围/kN | 0～500 | 0～600 | 0～800 | 0～1000 | |
| 电源/V | 9V电池 | |||||
| 质量/kg | 0.44 | |||||
